Lenkimas stiprumas iš the apšvietimas lenta gali būti padalinta į į sekančius du taškus:
First of all, the strength of the lighting board will directly affect its wind resistance pressure. Under normal circumstances, the bending strength of the lighting board is above 120mpa, and the spacing of the whole sandalwood is between 1.0m-1.5m. The storio of the daylighting panel is 1.2mm or 1.5mm, which is reliatyviai high in the whole wind resistance pressure.
Under normal circumstances, the domestic wind pressure in many areas in China is basically less than 1kpa, so if the bending strength of the lighting panels made by the manufacturer is greater than or equal to 120mpa, then it can actually meet the requirements. The demand for wind pressure resistance of industrial plants.
Antra, for daug profesionalus dienos šviesa lenta gamintojai ir gamintojai, aukštesnės kokybės dienos šviesa lentos are more special in use, and jų svarbūs indikatoriai are the maintenance of light transmittance and the ability to resist ultraviolet rays. It is not the tensile strength we paprastai think of. For lighting panels, the tensile strength is actually only one of the items that must be tested, but if it is guaranteed to be above 60mpa, there will be no problem in basic use.